Search

Results

c:stdio.h: 18 Hits

file | | [[c:stdio.h:fgetc|]] |Reads a byte/char from a file stream | | [[c:stdio.h:fgetpos... cator | | [[c:stdio.h:fgets|]] |Reads a byte/char string from a file stream | | [[c:stdio.h:... | | [[c:stdio.h:fprintf|]] |Print formatted byte/char output to a stream, | | [[c:stdio.h:fputc|]] |Writes byte/char to a stream | | [[c:stdio.h:fputs|]] |Writes byte/char string

arduino:conversion:bytecast: 7 Hits

======byte() ====== ====Description ==== Converts a value to the [[arduino:data_types:byte|byte]] data type. ====Syntax ==== byte(x) ====Parameters ==== x: a value of any type ====Returns ==== byte ====See also ==== * [[arduino:data_types:byte|byte]] Source: arduino.cc

arduino:data_types:char: 4 Hits

==Description ==== A data type that takes up 1 byte of memory that stores a character value. Charact... es numbers from -128 to 127. For an unsigned, one-byte (8 bit) data type, use the ''byte'' data type. =... code> ====See also ==== *[[arduino:data types:Byte]] *[[arduino:data types:Int]] *[[arduino:data typ

arduino:data_types:byte: 4 Hits

======byte ====== ====Description ==== A byte stores an 8-bit unsigned number, from 0 to 255. ====Example ==== [=byte b = B10010; // "B" is the binary formatter (B10010 = 18 decimal) =] ==... ta types:Word]] * [[arduino:data types:ByteCast | byte]] * [[arduino:variable scope and qualifiers:Varia

arduino:constants:progmem: 4 Hits

be supported. prog_char - a signed char (1 byte) -127 to 128 prog_uchar - an unsigned char (1 byte) 0 to 255 prog_int16_t - a signed int (2 bytes) -32,767 to 32,768 prog_uint16_t - an uns... counter variable char myChar; // read back a 2-byte int displayInt = pgm_read_word_near(charSet + k) // read back a char myChar = pgm_read_byte_near(signMessage + k); </code> **Arrays of strings

arduino:data_types:unsignedchar: 4 Hits

ion ==== An unsigned data type that occupies 1 byte of memory. Same as the [[arduino:data types:Byte]... r consistency of Arduino programming style, the ''byte'' data type is to be preferred. ====Example ==... 40;=] ====See also ==== *[[arduino:data types:Byte]] *[[arduino:data types:Int]] *[[arduino:data typ

arduino:advanced_io:shiftin: 3 Hits

In() ====== ====Description ==== Shifts in a byte of data one bit at a time. Starts from either th... specific pins. ====Syntax ==== <code arduino> byte incoming = shiftIn(dataPin, clockPin, bitOrder) <... it First) ====Returns ==== the value read (''byte'') ====See also ==== * [[arduino:advanced io:

arduino:data_types:unsignedint: 3 Hits

gers) are the same as ints in that they store a 2 byte value. Instead of storing negative numbers howeve... e of 0 to 65,535 (2^16) - 1). The Due stores a 4 byte (32-bit) value, ranging from 0 to 4,294,967,295 (... ode> ====See Also ==== * [[arduino:data_types:Byte]] * [[arduino:data_types:Int]] * [[arduino:data_t

arduino:data_types: 3 Hits

bles]] |booleanvariables | | [[arduino:data_types:byte|byte]] |byte | | [[arduino:data_types:char|char]]

arduino:advanced_io:shiftout: 3 Hits

t() ====== ====Description ==== Shifts out a byte of data one bit at a time. Starts from either th... ant Bit First) value: the data to shift out. (''byte'') ====Returns ==== None ====Note ==== The... ]. **shiftOut** is currently written to output 1 byte (8 bits) so it requires a two step operation to o

arduino:control_structures:goto: 3 Hits

condition. ====Example ==== <code arduino> for(byte r = 0; r < 255; r++){ for(byte g = 255; g > -1; g--){ for(byte b = 0; b < 255; b++){ if (analogRead(0) > 250){ goto bailout;}

arduino:data_types:int: 3 Hits

TMega based boards) an //int// stores a 16-bit (2-byte) value. This yields a range of -32,768 to 32,767 ... On the Arduino Due, an //int// stores a 32-bit (4-byte) value. This yields a range of -2,147,483,648 to ... de> ====See Also ==== * [[arduino:data_types:Byte]] * [[arduino:data_types:unsignedint|unsigned int

arduino:constants:integerconstants: 3 Hits

0 * 256) + B10101010; // B11001100 is the high byte </code> **Octal** is base eight. Only characte... er_syntax:define|#define]] * [[arduino:data_types:byte|byte]] * [[arduino:data_types:int|int]] * [[ardui

arduino:bits_and_bytes:highbyte: 3 Hits

iption ==== Extracts the high-order (leftmost) byte of a word (or the second lowest byte of a larger ... ==== x: a value of any type ====Returns ==== byte ====See also ==== * [[arduino:bits and bytes:

c:wchar.h:btowc: 3 Hits

arduino:data_types:short: 2 Hits

c:stdio.h:fgetpos: 2 Hits

c:conio.h:gettext: 2 Hits

c:stdio.h:fsetpos: 2 Hits

c:datatypes:long: 2 Hits

arduino:variable_scope_and_qualifiers:variabledeclaration: 2 Hits

assembly:8086_88:command_overview: 2 Hits

c:graphics.h:setfillpattern: 2 Hits

java:datatypes: 2 Hits

c:graphics.h:setrgbpalette: 2 Hits

c:string.h:strncat: 2 Hits

arduino:bits_and_bytes:lowbyte: 2 Hits

java:io:printstream:write: 2 Hits

arduino:conversion:wordcast: 2 Hits

arduino:bitwise_operators:bitshift: 1 Hits

c:datatypes:double: 1 Hits

c:stdlib.h:realloc: 1 Hits

c:stdlib.h:malloc: 1 Hits

arduino:bitwise_operators:bitwisecompoundand: 1 Hits

c:stdlib.h:calloc: 1 Hits

c:wchar.h:fwide: 1 Hits

cpp:variables: 1 Hits

c:graphics.h:setwritemode: 1 Hits

c:datatypes:long_double: 1 Hits

arduino:data_types:double: 1 Hits

arduino:data_types:unsignedlong: 1 Hits

arduino:data_types:long: 1 Hits

c:string.h:strcat: 1 Hits

c:datatypes:float: 1 Hits

cpp:datatypes:double: 1 Hits

arduino:data_types:booleanvariables: 1 Hits

c:datatypes:short: 1 Hits

c:string.h:memset: 1 Hits

arduino:bitwise_operators:bitwisecompoundor: 1 Hits

arduino:data_types:word: 1 Hits

c:graphics.h:getimage: 1 Hits

c:datatypes:bool: 1 Hits

java:io:printstream: 1 Hits

arduino:utilities:sizeof: 1 Hits

on the occasion of the current invasion of Russia in Ukraine