User Tools

Site Tools


Programming Reference/Librarys

Question & Answer

Q&A is closed


Table of Contents


Store data in flash (program) memory instead of SRAM. There's a description of the various types of memory available on an Arduino board.

The PROGMEM keyword is a variable modifier, it should be used only with the datatypes defined in pgmspace.h. It tells the compiler “put this information into flash memory”, instead of into SRAM, where it would normally go.

PROGMEM is part of the pgmspace.h library. So you first need to include the library at the top your sketch, like this:

#include <avr/pgmspace.h>


dataType variableName[] PROGMEM = {dataInt0, dataInt1, dataInt3...}; 

* program memory dataType - any program memory variable type (see below) * variableName - the name for your array of data

Note that because PROGMEM is a variable modifier, there is no hard and fast rule about where it should go, so the Arduino compiler accepts all of the definitions below, which are also synonymous. However experiments have indicated that, in various versions of Arduino (having to do with GCC version), PROGMEM may work in one location and not in another. The “string table” example below has been tested to work with Arduino 13. Earlier versions of the IDE may work better if PROGMEM is included after the variable name.

dataType variableName[] PROGMEM = {};   // use this form
dataType PROGMEM variableName[] = {};   // not this one
PROGMEM  dataType  variableName[] = {}; // use this form

While PROGMEM could be used on a single variable, it is really only worth the fuss if you have a larger block of data that needs to be stored, which is usually easiest in an array, (or another C data structure beyond our present discussion).

Using PROGMEM is also a two-step procedure. After getting the data into Flash memory, it requires special methods (functions), also defined in the pgmspace.h library, to read the data from program memory back into SRAM, so we can do something useful with it.

As mentioned above, it is important to use the datatypes outlined in pgmspace.h. Some cryptic bugs are generated by using ordinary datatypes for program memory calls. Below is a list of variable types to use. Floating point numbers in program memory do not appear to be supported.

prog_char - a signed char (1 byte) -127 to 128 prog_uchar - an unsigned char (1 byte) 0 to 255 prog_int16_t - a signed int (2 bytes) -32,767 to 32,768 prog_uint16_t - an unsigned int (2 bytes) 0 to 65,535 prog_int32_t - a signed long (4 bytes) -2,147,483,648 to * 2,147,483,647. prog_uint32_t - an unsigned long (4 bytes) 0 to 4,294,967,295


The following code fragments illustrate how to read and write unsigned chars (bytes) and ints (2 bytes) to PROGMEM.

#include <avr/pgmspace.h>
// save some unsigned ints
PROGMEM  prog_uint16_t charSet[]  = { 65000, 32796, 16843, 10, 11234};
// save some chars
unsigned int displayInt;
int k;    // counter variable
char myChar;  
// read back a 2-byte int
 displayInt = pgm_read_word_near(charSet + k)
// read back a char 
myChar =  pgm_read_byte_near(signMessage + k);

Arrays of strings

It is often convenient when working with large amounts of text, such as a project with an LCD display, to setup an array of strings. Because strings themselves are arrays, this is in actually an example of a two-dimensional array.

These tend to be large structures so putting them into program memory is often desirable. The code below illustrates the idea.

 PROGMEM string demo
 How to store a table of strings in program memory (flash), 
 and retrieve them.
 Information summarized from:
 Setting up a table (array) of strings in program memory is slightly complicated, but
 here is a good template to follow. 
 Setting up the strings is a two-step process. First define the strings.
#include <avr/pgmspace.h>
prog_char string_0[] PROGMEM = "String 0";   // "String 0" etc are strings to store - change to suit.
prog_char string_1[] PROGMEM = "String 1";
prog_char string_2[] PROGMEM = "String 2";
prog_char string_3[] PROGMEM = "String 3";
prog_char string_4[] PROGMEM = "String 4";
prog_char string_5[] PROGMEM = "String 5";
// Then set up a table to refer to your strings.
PROGMEM const char *string_table[] = 	   // change "string_table" name to suit
  string_5 };
char buffer[30];    // make sure this is large enough for the largest string it must hold
void setup()			  
void loop()			  
  /* Using the string table in program memory requires the use of special functions to retrieve the data.
     The strcpy_P function copies a string from program space to a string in RAM ("buffer"). 
     Make sure your receiving string in RAM  is large enough to hold whatever
     you are retrieving from program space. */
  for (int i = 0; i < 6; i++)
    strcpy_P(buffer, (char*)pgm_read_word(&(string_table[i]))); // Necessary casts and dereferencing, just copy. 
    Serial.println( buffer );
    delay( 500 );

See also

on the occasion of the current invasion of Russia in Ukraine

Russian Stop this War
arduino/constants/progmem.txt · Last modified: 2024/02/16 01:04 (external edit)

Impressum Datenschutz